8 Station 5C Collet System
Perfect for gripping parts on the outside diameter, the PAWS 5c Collet clamping system allows you to hold multiple-parts on one fixture plate with the added benefit of fast clamping. Our 5c dead length system has been designed with several key engineering features that make it ideal for OD gripping when tight tolerances, rigidity, and part repeatability are critical.
A key advantage of The PAWS 5c system is that it uses fixed (or static) collet sleeves, which control part location and provides center line repeatability of less than .0002”. The 5C Collet system holds parts up to 1.00” in diameter.
Our system also uses a proprietary “Pull to Close” clamping mechanism, so parts are pulled down against the dead length stop as the 5c collet closes, giving “Z” Axis length repeatability of less than .0002”
Workholding Features
- Hold parts up to 1.000 inches in diameter
- Pull to Close clamping against dead length stop
- Z height repeatability of less than .0002 inches
- Clamp 8 parts in seconds
Downloadable Data Files
Having troubles? Right click and select “Save Target As”
| Part # | Width | Height | Length |
|---|---|---|---|
| 3420-5C08-PKG-CP | 14.000 | 7.871 | 11.000 |
| Item # | Part # | Description | Quantity |
|---|---|---|---|
| 1 |
3080-20-CP |
DA20 HYDRAULIC BASE |
1 |
| 2 |
1/2-13 X 3.00 SHCS |
2 | |
| 3 |
3400-05-5C-TP-08-ASM |
8 STATION 5C FIXTURE PLATE ASSEMBLY |
1 |
| 4 |
1771 |
5/8 X 1.970 PRECISION LOCATING PIN | 2 |
| 5 | 3/8-16 X 1.00 SHCS | 4 | |
| 6 | 3400-02-5C-PSD-3125-18 | 5/16-18 PULL-DOWN SCREW | 16 |
| 7 | 3400-06-5C-MBASE-ASM | 5C MAIN BASE ASSEMBLY | 2 |
| 8 | 5/16-18 X 2-1/4 SHCS | 16 | |
| 9 | 3400-07-5C-CBODY | CLAMP BODY | 8 |
| 10 | 3400-09-5C-CP | 8 STATION 5C INTERFACE PLATE | 1 |
| Column 1 Value 11 | Column 2 Value 11 | Column 3 Value 11 | Column 4 Value 11 |
| Column 1 Value 12 | Column 2 Value 12 | Column 3 Value 12 | Column 4 Value 12 |
