8 Station 5C Collet System

Perfect for gripping parts on the outside diameter, the PAWS 5c Collet clamping system allows you to hold multiple-parts on one fixture plate with the added benefit of fast clamping. Our 5c dead length system has been designed with several key engineering features that make it ideal for OD gripping when tight tolerances, rigidity, and part repeatability are critical.

A key advantage of The PAWS 5c system is that it uses fixed (or static) collet sleeves, which control part location and provides center line repeatability of less than .0002”. The 5C Collet system holds parts up to 1.00” in diameter.

Our system also uses a proprietary “Pull to Close” clamping mechanism, so parts are pulled down against the dead length stop as the 5c collet closes, giving “Z” Axis length repeatability of less than .0002”

Workholding Features

  • Hold parts up to 1.000 inches in diameter
  • Pull to Close clamping against dead length stop
  • Z height repeatability of less than .0002 inches
  • Clamp 8 parts in seconds

Downloadable Data Files


Having troubles? Right click and select “Save Target As”

Part # Width Height Length
3420-5C08-PKG-CP 14.000 7.871 11.000
Item # Part # Description Quantity
1

3080-20-CP

DA20 HYDRAULIC BASE

1
2

1/2-13 X 3.00 SHCS

2
3

3400-05-5C-TP-08-ASM

8 STATION 5C FIXTURE PLATE ASSEMBLY

1
4

1771

5/8 X 1.970 PRECISION LOCATING PIN 2
5 3/8-16 X 1.00 SHCS 4
6 3400-02-5C-PSD-3125-18 5/16-18 PULL-DOWN SCREW 16
7 3400-06-5C-MBASE-ASM 5C MAIN BASE ASSEMBLY 2
8 5/16-18 X 2-1/4 SHCS 16
9 3400-07-5C-CBODY CLAMP BODY 8
10 3400-09-5C-CP 8 STATION 5C INTERFACE PLATE 1
Column 1 Value 11 Column 2 Value 11 Column 3 Value 11 Column 4 Value 11
Column 1 Value 12 Column 2 Value 12 Column 3 Value 12 Column 4 Value 12

 

Contact A Workholding Specialist

Questions? Contact us to speak with an engineer regarding your workholding application.

(810) 670-1317